connection of PC-DIO-96 and PCI-DIO-96

[A.Agapov]

Hello!
I have two cards PC-DIO-96 and PCI-DIO-96. I  want to connect two computers with this card. PC-DIO-96 card will stand on the computer which will work under DOS, and PCI-DIO-96 will work under Windows. Recently, I found out that those cards have little bit different I/O connectors. Simply, cable for PCI-DIO-96 which I have doesn't fit PC-DIO-96 and vice versa. Is there any special cables with two different connectors at ends, or maybe there is some kind of switchfrom one connector to another? And if there are such things where can you get one?
Thanks in advance!

[RT4CY]

Thanks for posting on the NI Forums!  If I understand you correctly, you are trying to communicate between two computers using a PC-DIO-96 and PCI-DIO-96.  Unfortunately, we do not have a special cable or adapter which would allow you to directly connect these two cards.  May I ask what you are trying to accomplish?  If you are trying to simply send digital data between two computers, I would recommend doing this over a network.  If you absolutely need to connect the cards this way, you could wire them to an intermediate terminal block.  Both cables terminate to two 50-pin female connectors.