Discussion:
how to link DIO hardware NI-usb-6501 with the labview DAQ assistant automatically
(too old to reply)
Kabul
2007-08-31 10:10:10 UTC
Permalink
Hi,
If the NI-USB-6501 shows up on the Measurement and Automation eXplorer it means that LabVIEW should know that the device is connected. When you place a DAQ assistant in LabVIEW 7.1, it should open "Create New Express Task..." dialogue box. If you set it up to Acquire Signal > Digital Input > Line Input, does the device show up on the physical tab?
Regards,
Kabul
2007-08-31 16:10:10 UTC
Permalink
Hi,
 
Have you ever had daqmx base on your computer before? If yes or you don't know, please read <a href="http://digital.ni.com/public.nsf/allkb/64BA7A1D64D3D5518625726D0066A780?OpenDocument" target="_blank">this</a>. I think this might be the source of you not being able to see it on daq assistant. Hope it helps.
Best Regards,

Loading...