how to change PFI ports

[gaertner.marco]

The DAQ asst. in LV 7.1 says: Connect to PFI 10, but I have only PFI 1 to 9 on my BNC 2120 connecting board. How can I change it?
I am using a M-series card PCI 6221.
 
Thanks a lot
 
Marco

[jaced]

Hi,

I have attached some screen shots that should help you to navigate to the correct property node in order to change the PFI line which you will use. I hope this helps!

<img src="Loading Image...">

One you place the Channel Property node then you will navigate as follows.

<img src="Loading Image..."><img src="Loading Image..."> Message Edited by jaced on 12-19-2007 02:27 PM


Channel node.jpg:
http://forums.ni.com/attachments/ni/70/7951/1/Channel node.jpg


Input terminal change.jpg:
http://forums.ni.com/attachments/ni/70/7951/2/Input terminal change.jpg


B input.jpg:
http://forums.ni.com/attachments/ni/70/7951/3/B input.jpg