PCIDIO24, MAX configuration issues, need input C node: fIRSTPORT CH

[[e-mail]]

This board (PCI-DIO24), although installed correctly is not picked up by MAX.  I found a C node in the user libraries which allows output without first needing MAX configuration (DBitIn.vi, Labview 7.1).
 
However, I now need a digital input C node and there aren't any for the firstportCH, any suggestions?
 
The Board is a PCI-DIO24.
 
Cheers
 
James
 

[rich_sills]

Hi James The PCI-DIO24 board is not a National Instruments product, it is made by <a href="http://www.measurementcomputing.com/cbicatalog/cbiproduct_new.asp?dept_id=142&amp;pf_id=821" target="_blank">Measurement Computing Corp.</a> Therefore it will not show in MAX as this is the Configuration Utility for NI hardware only. What software are you using to program the device? Have a look at the drivers that are linked on the above page and see if these can help you. Let me know if you are still having issues and I can look into this further. Rich NI | UK