Samples or how to use NI Digital I/O -- USB 6501

[War Eagle]

I bought a digital I/O USB 6501 and try to control my circuit. I want to set Port 0.0-7 and Port 1.0-7 as 16-bit outputs to control my circuit, and set Port 2.0-7 as input to read the data from my circuit. I just learn LabVIEW and need some samples to use the digital I/O, or guide to program how to use USB 6501.
 
Thanks,
 
 

[Dennis Knutson]

There are shipping examples (Help&gt;find Examples&gt;hardware Input and Output&gt;DAQmx&gt;Digital Measurements), the DAQ Assistant with it's own help, and <a href="http://zone.ni.com/devzone/cda/tut/p/id/5434" target="_blank">this</a>. When you try some code and if you get stuck, post back with information on what you've tried, what doesn't work the way you expect, error codes, etc.

[War Eagle]

Got it. Thanks,
&nbsp;
&nbsp;